Active vibration control of plates using positive position feedback control with PZT actuators

Abstract

In this study, the active vibration control of clamped plates using a positive position feedback (PPF) controller with a sensor/moment pair actuator (non-collocation configuration) is considered. To identify the characteristics of the PPF control system, a numerical parametric studies is conducted. The design parameters (gain and damping ratio) of the PPF controller are shown to have a significant effect on the stability and performance of the control system. Using these results, a multi-mode (first and second mode) single-input single-output (SISO) PPF controller is implemented. Two PPF controllers are connected in parallel with the SISO configuration. The final designed multi-mode PPF controller showed good conditional stability and high performance. The vibration levels at the tuned modes are reduced by about 5 dB. Finally, the performance of the PPF controller is experimentally verified. The disturbance levels at the target modes can be reduced by about 5 dB, nearly the same as the theoretical result. (C) 2016 Institute of Noise Control Engineering.